Запустите .pif в DOSBOX
Я пытаюсь запустить файл .pif в dosbox. Я попытался набрать имя файла с последующим расширением (например, game.pif ), но dosbox говорит « illegal command ».
Как я могу это исправить? Есть ли другой способ, которым я могу сделать это (например, аргументы командной строки)?
Я немного поискал и понял, что .pif — это ярлык для файла .exe . Но запуск файла .exe для игры не работает, так как он работает в режиме совместимости. И это то, что здесь делает .pif .
2 ответа 2
Как было объяснено выше, PIF (файл информации о программе) использовался в дни, когда Windows работала под DOS. Это был набор инструкций для Windows о том, как открыть файл DOS в окне. Те времена прошли, когда Windows является собственной операционной системой. Вы все еще можете прочитать PIF-файл, чтобы определить, что он делает, а затем создать BAT-файл в DOSBox, который делает то же самое.
Существует также ряд приложений DOS Menu/Launcher, которые вы можете найти в открытом доступе, которые должны вам помочь.
Я отвечаю на свой вопрос, так как это может быть полезно для кого-то, кто ищет ответ.
Вот что я сделал, чтобы решить эту проблему. Я использовал hex-редактор и, как упомянул anglfstangard, попытался определить, что на самом деле делает файл .pif. Оказывается, что pif-файл просто выполняет основной exe-файл приложения с дополнительным аргументом -C, который я понял только путем чтения .pif-файла.
DosBox 0.74 — "Illegal Command" Error When Mounting
I am running DosBox 0.74 on Linux Mint 18 and have an issue with trying to run certain built-in commands.
When using the dosbox-0.74.conf file to mount images, folder, etc., it works fine. However, I am unable to mount anything from within the DosBox prompt itself.
When trying to use the mount or imgmount commands, I get the error Illegal command: mount. .
Even running help /all does not list these as available commands.
I seem to remember being able to use mount all the time in the past (and indeed, many tutorials found online still say to issue the mount command from within DosBox).
Illegal command dosbox что делать
Reddit and its partners use cookies and similar technologies to provide you with a better experience.
By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising.
By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform.
For more information, please see our Cookie Notice and our Privacy Policy .
Illegal command dosbox что делать
ОМГ. Да что же там МЕСЯЦ настраивать?!
ладно.
попробуем вместе настроить.
Может быть, за полмесяца вместе справимся
1) Вы, судя по всему (скриншот) установили себе DosBox
т.е. у Вас есть ярлычок для запуска DosBox
нажмите правой кнопкой мышки на этом ярлычке, выберите в выпавшем меню "Свойства" и покажите, что у Вас на закладке "Ярлык" в поле "Объект" ?
например, у меня Windows 7 64 бита,
в свойства ярлычка прописано:
нажмите кнопку выполнить.
Внимание! если DosBox установлен у Вас в другую папку, то укажите свой путь к программе DOSBox.exe
если сделаете всё правильно, откроется блокнот с загруженным файлом конфигурации.
что там и как — можно почитать в документации (см. например, DOSBox 0.74 Manual.txt в каталоге программы) , но Вам это на первом этапе не так важно.
Вам нужно опуститься вниз, в самый конец файла и найти там секцию, которая называется [autoexec]:
dosbox1.png
DosBox 0.74 — "Illegal Command" Error When Mounting
I am running DosBox 0.74 on Linux Mint 18 and have an issue with trying to run certain built-in commands.
When using the dosbox-0.74.conf file to mount images, folder, etc., it works fine. However, I am unable to mount anything from within the DosBox prompt itself.
When trying to use the mount or imgmount commands, I get the error Illegal command: mount. .
Even running help /all does not list these as available commands.
I seem to remember being able to use mount all the time in the past (and indeed, many tutorials found online still say to issue the mount command from within DosBox).
DosBox и ошибка "Illegal command: masm"
Ошибка: "the ntvdm cpu has encountered an illegal instruction"
помогите сделать скриншоты. для кода. сделала только скрин начало и компилирование..а ход и конец.
Сравнение чисел: ошибка "ntvdm cpu has encountered an illegal instruction"
Написал такую программу .model tiny .code org 100h start: X db 5 Y db 7 a db ‘5 > 7$’
"Program not found" при запуске в DosBox
Вообщем проблема с программой.Запускаю в DOSBOX,выдает "Program not found". Программа деления.
забить на досбокс, поставить человеческую виртуалку и дос
Добавлено через 24 секунды
проблема больше по части виртуалок, а не ассемблера.
Добавлено через 12 секунд
читай маны
Сообщение от Мотороллер
Сообщение от tipahead
Сообщение от tipahead
Сообщение от tipahead
Сообщение было отмечено tipahead как решение
Решение
Сообщение от Мотороллер
И что в "человеческой досе" ml.exe пойдет ?
Добавлено через 4 минуты
Сообщение от tipahead
Сообщение от tipahead
Ну и нахрен он в данном случае нужен ? Эмулятор нужен чтобы запустить результат компиляции.
Но саму-то компиляцию нужно делать в виндах. Ибо masm32 только там и работает.
Добавлено через 6 минут
Если ты хочешь компилировать в эмуляторе, то тебе нужен древний MASM 3.0, который
только в MS-DOS работал. А ты взял виндозный MASM32. И чего ты ожидаешь ?
Что он в dosBox-е пойдет ? Никогда не пойдет. Он же только в виндах работает.
С помощью MASM32 компилировать надо в виндах. И только запускать в досбоксе.
А чтоб компилировать в досбоксе нужно взять древние досовские версии MASM/TASM.
Добавлено через 6 минут
Кстати да. Древний MASM 3.0 не поймет строчек
.MODEL Small
.STACK 100h
.DATA
.CODE
Зато TASM поймет. Под MS-DOS работали версии TASM 2.x и 3.x
Assembly: TASM illegal command
Few weeks ago I asked for a similar TASM compiler, but seems that the instructor wants nothing but TASM. So I installed this using wine in DosBox.
But no matter what my code is, when I run tasm helllo.asm I get
illegal command: TASM
I tried different tasm packages, including the official tasm 5.
Would you please try to run the software I linked to above in Dosbox? and see if you can actually execute anything? I’m on a 64 bit intel pc.
2 Answers 2
I can’t tell why it doesn’t work for you without more information about your setup, but this is how I set it up and it works just fine (as far as I can tell, not knowing assembly).
Download Tasm for Windows from sourceforge and install it with WINE. Then download and install dosbox for Windows (direct link).
Now you should have two shortcuts on your desktop:
Tasm 1.4 Windows 7 — Windows 8 64bit By Techapple.net
Double click the Tasm shortcut. You should be presented with a maximized DOSBox window. If you don’t want to work in maximized mode press Alt + Enter .
Now we appear a bit stuck, since C:\ is mounted as a WINE virtual disk at the location of Tasm. The simplest way around this is simply mount a new drive letter at the folder where your .asm files are located.
Troubleshooting Illegal Command Error When Mounting in DosBox 0.74
The error message "Illegal command FOR" indicates that the command processor included with QBPROGS is not completely compatible with the command syntax of MS-DOS and Windows NT's command processors. To resolve this issue, follow these steps: 1. Open the terminal and type in the command to mount your working folder. 2. Change the directory by typing the appropriate command. 3. Instead of directly typing the command "qbasic.exe," first install "oldox.exe" using the following command. 4. Complete the installation process.
DosBox 0.74 — "Illegal Command" Error When Mounting
I am encountering a problem while attempting to execute specific built-in commands in DosBox 0.74 on Linux Mint 18.
While the dosbox-0.74.conf file successfully mounts images, folders, and more, I encountered difficulty when attempting to mount anything directly from the DosBox prompt.
I encounter the Illegal command: mount. error when attempting to utilize either the mount or imgmount commands.
Despite executing help /all , these commands are not listed as available.
In the past, I recall using mount frequently. This command is still mentioned in numerous online tutorials for DosBox.
What am I missing?
Solution 1:
The mount and imgmount commands can be found on the virtual Z: drive in DOSBox. To run them, you can either keep Z:\ in the PATH or explicitly specify the drive letter. For instance:
Solution 2:
To resolve the issue of an illegal command, simply right-click on Dosbox and restart it as an Administrator.
DOSBox tutorial-2 (error:can't change to directory
Running debug.exe on a 64-bit windows (64x system)
Configure DOSBox to run TASM and Debugger
This video demonstrate how to configure the DOSBox Emulator to run the debugger and the assembler on Windows OS.
Dosbox error in tasm as illegal command
Whenever I use the DOSBox emulator, after mounting, I enter "tasm" or "td tasm" to edit the TASM file. However, an error message pops up saying "error "illegal command tasm" or an illegal command for "edit".
Solution:
This issue is unrelated to Ubuntu, but instead, it pertains to MS-DOS, specifically DOS-Box. It appears that your tools location was not properly mounted, or you may be running them from the wrong location without setting up your path variable. In DOS-Box, the error "illegal command" is equivalent to "bad command or file name" in a real MS-DOS environment. To resolve this, start by ensuring that you have Turbo Assembler/Debugger downloaded on your PC. Then, after running DOS-Box, use the mount command to mount your tools location. Finally, change the current drive to the letter of the mounted drive (e.g., c:). You can now run your tools (td / tasm /. ) in the same way as in MS-DOS.
Getting error "Illegal Command: qbasic.exe" on dosbox after successful installation on ubuntu
I utilized the following command to install Dosbox on my ubuntu machine.
Upon installation, I access dosbox by executing the given command.
I open the terminal and then proceed to mount a pre-existing working folder.
qbprogs is the pre-existing directory that I have created as my working directory. Subsequently, I change my directory by inputting the necessary command.
After receiving the prompt, which is "C:>," I can continue by typing the following.
I get the following error.
Despite my attempts to find a solution on the internet, I was unsuccessful. Could you please provide assistance?
Solution:
It appears that the qbasic.exe file is not located in the directory you are trying to access. To resolve this, you can either locate the qbasic.exe file and move it to the designated directory (in this case, the qbprogs directory) or follow the instructions provided below.
Obtain the olddos.exe file by accessing the provided link.
Please visit the following link to download the desired content: http://www.pcxt-micro.com/download.html.
Once you have downloaded it, simply place it in your designated working directory (referred to as qbprogs), and proceed to open the terminal. From there, you can enter the necessary commands.
Subsequently, proceed to mount your working directory by utilizing
Following that, modify the directory by entering the command
Instead of directly installing qbasic.exe, start by installing oldox.exe using the following command.
After installation. Use
and it will work.
Cannot execute some DOS commands in DosBox
I'm attempting to write a batch script in dosbox, but I am encountering a lack of certain commands.
For instance, when I run this code:
I'll get empty line.
I am unable to execute the command FOR as it returns an error message stating 'Illegal command FOR'.
Solution:
The command processor included with DosBox does not fully align with the command syntax of MS-DOS command.com or, in particular, Windows NT's cmd.exe command processors.
Refer to this page for the available commands and their syntax in DosBox. While they may be similar, they are not identical to the commands used in MS-DOS.