Receive Buffers — что это? (включать или нет)
Receive Buffers — позволяет установить значение буфера приема, рекомендуется ставить максимальное.
Если установить слишком малое значение — могут быть например лаги в онлайн-играх.
Разбираемся
- В интернете есть немного путаница. Есть буфер приема, а есть буфер отправки. Receive Buffers — это именно прием.
- Если в Receive Buffers указать большое значение — может повысить производительность сетевого адаптера, но также может больше использоваться памяти.
- Значение обычно можно указать от 1 до 512, но максимальный размер зависит от адаптера.
- На одном авторитетном сайте нашел информацию, что Receive Buffers лучше увеличивать на максимум. Это может реально повысить отзывчивость сети.
- Думаю стоит попробовать увеличить, особенно если ПК современный — никакого повышенного использования оперативки вы не заметите, там значения мизерные. Вот если у вас Windows XP и 256 оперативы — тогда может и не стоит увеличивать. Однако эту систему, да и еще с таким обьемом оперативки сейчас мало кто использует))
- Буфер приема в принципе приоритетнее буфера отправки, почему? Потому что обычно на ПК мы больше качаем, чем отдаем.
- Важно понимать, что буфер приема должен быть минимум 100*MTU. Стандартная величина MTU равна 1500 байт. Поэтому размер буфера приема должен быть минимум 147кб. Если установить меньше — может быть потеря пакетов, что будет видно как например непонятные глюки в онлайн-игре. Влияние на ping эти настройки не оказывают.
- Лично у меня в адаптере TP-Link Gigabit PCI Express Adapter по умолчанию значение в Receive Buffers стоит 512, поэтому вам также советую посмотреть и если что — ставьте максимально доступное.
Вот какое значение установлено у меня (по умолчанию):
Надеюсь данный материал был полезен. Удачи и добра, до новых встреч друзья!
Настройка сетевого адаптера
Интернет — это лучшее изобретение человечества, он объединяет более 35% населения Земли, а также открывает неограниченные возможности для обучения, работы, отдыха и общения. В вашем компьютере он появляется при помощи сетевого адаптера, имеющего беспроводной(Wi-Fi) или проводной интерфейс. В этой статье я расскажу о настройке адаптера для подключения к сети.
Есть несколько типов подключения интернета:
- Телефонная линия
- DSL, кабельная сеть или электропроводка
- Мобильная связь (2G,3G,4G — LTE)
- Оптоволокно
- Спутниковый интернет
Каждый из них имеет свои специфические особенности, однако компьютер чаще всего подключается при помощи обычной витой пары — кабеля RJ-45, либо при помощи Wi-Fi соединения с роутером(который, в свою очередь, тоже работает через витую пару или USB-модем).
Настройка. Так как большинство пользователей использует Windows 7, то рассказывать я буду на ее примере.
Для этого мы переходим в Панель управления -> Сеть и Интернет -> Центр управления сетями и общим доступом, затем слева в меню выбираем Изменение параметров адаптера.
Здесь Вы можете увидеть список всех адаптеров компьютера и их статус подключения, включая Bluetooth-адаптеры, а также виртуальные адаптеры типа Hamachi.
Обычное подключение через витую пару(без роутеров, модемов)
Кабель «Витая пара» — RJ-45 — 8P8C
Тут также есть 2 варианта: Вам необходимо настроить соединение и каждый раз выполнять подключение либо Ваш провайдер поддерживает технологию DHCP и Вам просто необходимо воткнуть кабель в разьем.
В зависимости от Вашего варианта нужно правильно настроить адаптер.
Вариант 1
Заходим в список адаптеров. Выбираем нужный(Подключение по локальной сети . ) и нажимаем на нем правую клавишу мыши(ПКМ), здесь выбираем Свойства. В открывшемся списке выбираем компомнент Протокол Интернета версии 4 и нажимаем кнопку Свойства. Сюда необходимо вписать настройки, выданные Вашим оператором.
Вариант 2
Операция аналогичная Варианту 1, только в свойствах протокола необходимо установить флажки Получить IP-адрес автоматически, Получить адрес DNS-сервера автоматически.
Подключение при помощи роутера
Обычно роутер имеет 5 разьемов(4 LAN и 1 WAN). Кабель от интернета вы подключаете в WAN порт(он отделен от остальных), а затем при помощи второго кабеля/Wi-Fi адаптера соединяете роутер и компьютер. После этого (Смотрите Вариант 2 в подключении через витую пару), в адаптере Wi-Fi эти настройки стоят по-умолчанию.
Для последующей настройки интернета Вы заходите по локальному адресу роутера(192.168.0.1 или 192.168.1.1 — по-умолчанию) и выполняете необходимые действия.
Как настроить роутер Asus Вы можете прочитать в этой статье — https://idej.net/peripheral/44-kak-nastroit-router-asus.html
Остальные типы я расписывать не буду, все вопросы можете задать в комментариях.
Теперь детальнее о настройках адаптера
Чтобы увидеть эти настройки надо зайти в список адаптеров, нажать ПКМ на нужном адаптере, выбрать Свойства, затем под строкой с полным именем адаптера нажать кнопку Настроить. Здесь перейти на вкладку Дополнительно.
В основном, свойства одинаковы у всех адаптеров, однако все же есть небольшая разница.
Maximizing TCP Throughput in Linux: Understanding and Tuning Send and Receive Buffers
A standard performance tuning recommendation for distributed systems running on Linux is to adjust the tcp_rmem and tcp_wmem Kernel tunables. But what are these? Why are they important? How do they work?
In today's article, we are going to explore the tcp_rmem (Receive Buffer) and tcp_wmem (Send Buffer) work and how to adjust them to improve network-based application performance.
Understanding TCP Buffers
To better understand how TCP Buffers work, let's explore a scenario where "Application A," a Client, wants to send data to "Application B," a Server over TCP (depicted below).
The Sender
In the diagram above, we can see that Application A would like to send 4000 bytes of data to Application B. To do this, Application A will append the data to the socket using either the write() or send() system call. From an application perspective, the data has been written to a socket, but the data is first appended to a Send Buffer for that socket.
Once the data is available within the Send Buffer, the Kernel will break up the data into a series of TCP packets.
Typically, the default size of a packet on Linux systems is 1500 bytes, with the first 24 bytes being the packet header; this means a single packet can hold 1476 bytes of application data. To send 4000 bytes of application data, the Kernel will need to send three packets.
As an application, we don't need to worry about how much data goes into one packet. Applications write data to a buffer. The Kernel takes the data from that buffer and sends it to the target system in however many packets are required.
The Kernel will also keep the application data within the Send Buffer until the Server has acknowledged the sent packets. It does this in case packets need to be retransmitted in cases of packet loss.
Receive buffers что это
Working on the receive buffers is one of the several ways of improving internet connections on your computer. This post will show you other useful methods.
- This Trackball Contains All Of Its Electronics Inside
- Internet Shutdowns In India By The Government Caused A $2.7 Billion Loss In 2020
- You May Not Know These Things From Before The Internet
Many people have fiddled around with the network adapter properties menu in their Windows computer. Sometimes you change the DNS gateways, disable and enable the adapter, or even changing your IP addresses when you need to. But in addition to these basic tricks, you can do a lot of stuff to make the most of your network, which we will show you in this post, involving the receive buffers. You can control the network adapter settings and options for wired and wireless connections. This post will include some essential tips.
receive buffers gaming
Before getting started, if you don’t know where to find the menu in Windows 10, head to Settings > Network & Internet, then click on the Ethernet option in the left column and click on Change adapter options located on the right. Here, you will see all of your WiFi and Ethernet network adapters, including virtual ones that your VPN software or virtual machines created. Keep in mind that when making changes, you need to work on the adapter that has an active internet connection. That means if you are using a wireless internet connection, you need to make all the changes to your WiFi adapter.
Receive Buffers
There’s another way to access the network adapter page, which is right-clicking on the Network item located on the system tray and clicking on Open Network & Internet Settings. This way, you won’t have to open Settings first. Or you can type ‘Ethernet settings’ into the search bar in the Start menu, which will launch the Ethernet window. Or you can press Win+X then press W, which will take you straight to the Network & Internet window.
Enter a third-party DNS server address manually
You may not be able to control your external IP address by default, but you can change your DNS server address. While some ISPs have DNS servers of their own, most users use Google’s DNS server.
However, there are a lot more options for DNS servers available with many benefits as well. Some are hyper-fast and some offer better security. If you change the DNS server, you will be able to access websites that the service provider has blocked.
Your DNS server resolves website URLs, so its speed can become the defining point. You can consider using DNS servers offered by Cloudflare, which are 1.0.0.1 and 1.1.1.1. Or you can choose Google’s DNS servers, which are 8.8.4.4 and 8.8.8.8.
Receive Buffers
You just need to visit the network adapter properties menu, double-click the ‘Internet Protocol Version 4 (TCP/IPv4)’ option, and you will see a pop-up window. Next, click on ‘Use the following DNS server addresses’ and enter the addresses mentioned above.
If you want to add more, you just have to click on Advanced and open the DNS tab, which allows you to add as many servers as you want and sort them out based on a connection priority.
Assign higher receive buffers or transmit buffers
What is receive buffers, you may wonder. When you are receiving or sending packets, there is a buffer in the system memory used by the adapter. A higher buffer size will offer higher performance. However, as you raise the buffer size, you also increase the memory footprint. By default, a system is often set to an optimal size automatically, which is 256 in most cases. You should find the Transmit and Receive Buffer in the list.
Receive Buffers
What is the max receive buffers? The recommended answer here is 512 or 1024, or you can opt for 2048 if your RAM can support it. Make sure that the transmit buffer size is twice that of the receive buffer. Also, a buffer size lower than 256 will result in dropped packets but don’t use a huge buffer size immediately, you need to test until you get the optimal size for your system memory.
Disable File and Printer Sharing for Microsoft Networks
For those using one PC setup and not connecting any other Windows machine to your network, you do not need the ‘File and Printer Sharing for Microsoft Networks’ and ‘Clients for Microsoft Networks’ in Ethernet Properties. So, you can disable them to improve the speed and security of your systems. Those using a multi-PC setup should not disable this feature.
Increase traffic regulation efficiency using Flow Control
You can disable Flow Control to increase the traffic regulation efficiency for connections. The implementation of Flow Control is said to be buggy in some network adapters, which impacts the connection. Disabling Flow Control will reduce timeouts as well as improve throughput. But before disabling it, you should read to understand how good its implementation is in the network adapter of your system.
Receive Buffers
Disable interrupt moderation
The interrupt moderation rate determines how often the adapter interrupts the system so as to manage the outgoing and incoming packets. The high and low rates have their own up and downsides.
A higher rate means the CPU utilization drops so you will get better machine performance but less responsive packet handling. On the other hand, a lower rate means the CPU utilization goes up, which affects the machine performance but results in more responsive packet handling.
Receive Buffers
If you directly disable interrupt moderation, you will get the lowest possible latency but this means lower machine performance. For gamers who play multiplayer games with a powerful CPU, you’d better disable interrupt moderation.